Being in the market for a new can of Lucas Break-In Oil, I was wondering if it is worth the $7.50 price tag. After some research on this question, I found that Lucas has been around since 1911 and they are one of America’s largest oil companies.
The company also offers many other types of oils like “Lucas Racing Oil” which is used by NASCAR race teams! This made me feel much better about spending my money on their products!
When we first started using Lucas Break-In Oil, we weren’t sure what to expect. We were worried that it would be too thick and goopy and not allow the engine to breathe properly.
Turns out, this is just about the best thing you could do for your vehicle when you’re breaking it in! It’s a must-have if you want your car or truck running smoothly from day one!
Lucas Oil is a brand that most people have heard of, but not many know much about. What is Lucas Break-In Oil? Is it any good? Let’s take a look at the facts and see what we can come up with.
Table of Contents
Is Lucas Break-In Oil Any Good?
Lucas has a winner with this break-in additive! It made my engine run better after it was rebuilt.
I put 5 shots of Lucas’s magic formula into the intake tract on top of fresh piston rings and new gasket material before beginning operation at 2500 RPMs, but even then I felt like there were some rough spots near high speed where combustion was occurring most aggressively.
So thankful that by using their product we can now rest easy knowing all those little burned areas are protected thanks to its special formulation designed specifically for engines under pressure/stressed conditions.
Lucas Oil’s addition of special anti-wear additives greatly reduces the wear and tear on valves, lifters, camshafts, and other critical engine parts. These additives are designed to fill worn areas so they won’t have to be built up with extra bearing material resulting in the additional metal being deposited on the parts.
This can save customers thousands of dollars in engine repair costs. Although some people recommend running high rpm conditions, putting your engine under high load for extended periods is not part of proper break-in procedures.
Lucas Engine Treatment contains all the ingredients that are necessary during the initial start-up phase to include the following: Antiwear and extreme pressure additives to provide proper wear protection while the new oil is being deposited on parts.
Dispersant additives help control harmful acids that form during combustion. Detergent additives remove carbon deposits and other contaminants from vital engine parts.
How Much Zinc Is In Lucas Break-In Oil?
The addition of 16 oz. to 4.5 quarts of motor oil will contain approximately 5,000 ppm of Zinc – that’s more than enough zinc for all who fear the initial break-in period! Lucas TB Zinc-Plus Engine Break-In Oil Additive is designed especially if you’re running a flat tappet camshaft and want less Inheritance!
Lucas is a product full of essential oils that are designed to reduce wear on your engine while allowing for increased power and miles per gallon!
Is Lucas Oil The Best Break-In Oil?
It has all the ingredients to be the best. It is a trusted break-in oil for those that use it. The only con is the price tag, but you get what you pay for and in this case, it’s a great break in additive.
The best break-in oil that I have found is Lucas Oil. It does what it says, and the results are noticeable.
Lucas Oil will provide excellent protection for your engine during the critical break-in period! To maintain maximum performance, after break-in you should use any brand of high-quality motor oil containing sufficient levels of ZDDP (zinc-dithiophosphate).
Lucas Oil is easily the best break-in oil currently available on the market! Their oil and additive product line has been trusted among enthusiasts for decades and has allowed them to become one of the most popular and respected brands currently available.
How Long Should You Run Lucas Break-In Oil?
Initially run your engine at 2,500- 3,000 rpm for at least 15 minutes. After that, you can drive it as if you were driving Ms. Daisy for the first 1,000 miles. Some mechanics even say you want to baby your engine for the first 2,500 miles.
That is safer, but it is overkill for some engines. Always refer to your car’s manufacturer’s recommendations.
The sound of the engine purring is music to anyone’s ears. As you turn that key and hear it come alive, so does your heart beat faster with anticipation for what lies ahead! Break-in oil should be applied after installation but before driving off as well—the rule goes one month if used every day (or weekend).
One other thing: remember not to exceed 10 miles per hour when first getting acquainted because this will cause excess wear on parts like belts or joints without enough time spent acclimating them properly beforehand.”
It’s not just about putting new oil in your engine and giving it some gas. There are a few other steps to follow before that happens, including running at high RPMs for 15 minutes or so (and we don’t mean on the low setting), then seating those pesky rings with only seven passes through our testing machine!
When Should You Change Break-In Oil?
If you just bought a new engine, then it’s time to change your oil. 50 miles after the first use of break-in oil is best for determining how often and when in between changes we should do this again! 500/500/-1k or 4K later? No problem – go with synthetic if that suits your fancy better than regular petroleum-based products.
If there are fresh engines on hand at some point during ownership (which most people end up owning), they’ll need their own type-specific oils changed more frequently:
At around fifty kilometers away from getting started using what seems like an appropriate quantity relating right off bat; after which follow @50km intervals thereafter.
Lucas Break-In oil is not synthetic engine oil. You can see on the bottle that it’s a petroleum-based engine treatment. There are many advantages of synthetics, but brek in isn’t one of them – as there are no friction modifiers, nothing has to be “broken” down with this!
Main Takeaways – Is Lucas Break-In Oil Any Good??
Conclusion paragraph: Is Lucas Break-In oil any good? Maybe we should just take a look at the reviews to find out! There are not that many of them, but I found one where someone said they put it on their lawnmower and it was working great after only 2 days.
They were so happy with how well this product worked for them-they gave it 5 stars! That sounds like an excellent option if you need some help breaking in your new engine or want something to use when you change your own oil.
It may be worth checking out what other people are saying about this stuff before buying anything else because there is no way all these reviews can be wrong!
Lucas Break-In oil is a popular choice among motorcyclists. It has been around for over 100 years and it offers an affordable, high-quality product that will keep your bike running smoothly and reliably. However, this article isn’t about whether or not you should use Lucas Oil.
We’re going to take a look at something else: how fast does Lucas Break-In Oil work? The short answer is “it depends.” Depending on the type of engine lubricant you are using before switching to Lucas Oil, there could be some residue left behind from the previous product.
If so, then it may take longer than expected for the effects of the new oil to kick in. A good rule of thumb would be 10 hours driving time with no oil changes.
Thanks for reading and stay dirty