Sick of manually setting up your trailer? An electric trailer tongue jack can take you from a hardy weekend camper to a luxurious millionaire. Well, it won’t give you millions, but it will make you feel like your seriously upgraded your camper only those in the upper tax brackets have.
A lot of drivers are looking for ways to drive their RVs without getting out of their cars. An electric jack is a tool that can be used to raise or lower a trailer. There are many different types of electric jacks on the market, some of which are cheaper than others. Look for the best one for your needs.
An electric trailer tongue jack is a much safer and simpler way to move a heavy load than using a manual one. There are many electric trailer jacks to choose from, so you can find the one that’s right for you.
These jacks have a reputation for being very dependable and safe, so you can rely on them to get you to your destination safely. They’re also stylish, so you’ll probably be pleased with the way they look.
The Lippert 3,500 lb Power Tongue Jack is a top overall choice for electric trailer tongue jacks This electric trailer jack is available at an affordable price. I personally like it because it comes with everything you need to install it. You don’t need to invest in any additional tools for the job.
This electric trailer tongue jack can be used with any A-frame trailer. The jack has a rocker switch that can raise or lower the trailer automatically. It does require a 30-amp circuit and comes with four lights that shine down onto the trailer coupler.
These lights make the job of connecting your travel trailer much easier and relatively safer. Plus, it comes with a textured case to protect it from damage by dirt and debris while you are driving. It is just a little extra accessory that is needed big time. Check the current price on Amazon.
What I like:
- It comes with everything you need to install it
- It is made of a textured case to prevent electronic parts from being damaged
- LED lights allow you to connect or disconnect your trailer at any time
- This jack can handle trailers up to 3,500 lb
What I don’t like:
- This jack is designed for use only with A-frame trailers
2. Husky 82022 5,000 lb (Remote)
The Husky is my pick for the best heavy-duty electric trailer tongue jack.
This trailer tongue jack can carry a maximum of 5,000 pounds. This jack comes with an 18-inch stroke, so you can operate it from a safe distance.
It is rated for a six-inch up and down cycle and requires a maximum travel time of 60 seconds. The electronic box which controls this jack is equipped with soft trigger switches which make it simpler to operate.
The panel on the back of the box is backlit with LEDs so you can see it in low light.
The jack on this unit is 2.25 inches in diameter.
Inside the ball, you’ll find a 20-millimeter screw design with superior lifting capacity.
This design also reduces the amount of wear and tear on the motor and reduces the total amperage drawn by this powered jack. In fact, this jack only draws a maximum of 25 amp at full load.
The remote control which comes with this jack will work up to 40 feet from the Jack itself. It also comes with a second key for safekeeping, in case you lose your primary remote. And that remote control is linked to the jack’s power alert warning system, which lets you know if it’s not being supplied with plenty of power. Check the current price on Amazon.
What I Like:
- This tongue jack can hold a maximum load of 5,000 lb
- The stroke of this jack is 18 inches long
- This makes it easier to see the buttons of the electronic box when the light is fading
- The six-foot-long power cord is a great length to use with your car
What I Don’t Like:
- It is one of the more expensive RV jacks on the market
- These tongue jacks are made for use with A-frame trailers only
The SuperHandy power tongue jack may be the most versatile trailer tongue jack. This tongue jack can be used with A-frame trailers, RVs, camper trailers, and boat trailers.
It has a maximum load capacity of 3,500 lb and a draw of 25 amps This Jack also has a Water-Resistant, One-Piece Housing Around The Motor And All Electronics. It requires a 7 pin trailer connector and comes with a 48-volt power cord.
It is also capable of reaching a maximum vertical height of 18 inches and has a retractable height of 29.2 inches. At the bottom of the stroke, this jack has a footpad that measures six inches in diameter and the vertical tube of this jack is two and a half inches in diameter.
It also has an emergency detachable handle that can be raised or lowered manually. All of the metal parts of this trailer are powder coated for rust resistance. It’s also equipped with a number of LED lights to assist you in pairing or un-pairing your trailer after dark.
This jack is also a very light 24 pounds, so it won’t add a lot of weight to your trailer. It also has a 25-amp circuit breaker. Check the current price on Amazon.
What I like:
- You’ll be able to use the tongue jack with a variety of trailers and RVs
- Water-resistant homes protect all electrical components from damage caused by water
- An emergency crank handle can be used to raise or lower the jack
- LED Work Lights: Make it safer to pair or unpair your trailer after dark
What I don’t like:
- With only four feet of cable, you won’t always be in a position to connect your specific vehicle-trailer combination.
What I think is the most durable against the elements is the Husky 4,500 Brute. Another great electric trailer tongue jack for larger trailers is the Husky Brute power jack.
This jack features a weather-resistant trailer connector storage bracket and a durable hammer-gray finish.
It also includes hardened steel gears that have been soldered together for extra strength. It boasts an 18-inch full stroke with a six-inch adjustable dropdown leg. This design reduces the amount of time needed to operate the jack.
On the front of the hitch tongue, you’ll find a three-way LED lighting system. Inside the jack is a friction-reducing ball screw that smooths out the movement of the motor. It is also one of the most powerful RV jacks on the market, with a maximum speed of 10 inches per second.
SmartStop technology is also included in this jack, which will shut down the motor if it senses the jack extends fully. This is not a common feature that more electric jacks can easily incorporate and extend their useful life. Check the current price on Amazon.
What I like:
- The trailer tongue jacks have a weather-resistant storage bracket
- This tongue jack can be used for trailers that are over 4,500 lb
- Reduces operation time and motor wear and tear
- Reduces friction and smooths operation
What I don’t like:
- This is one of the more expensive electric tongue jacks on the market
- This jack has a 5.5-inch diameter footpad
Unlike most other electric trailer tongue jacks this bad boy includes a detachable emergency crank handle if you need a workout, or if the electric motor fails. This fail-safe can be a lifesaver for those that like to brave the offroad with their trailers.
It features a slim design that saves room and a speed of operation that is 20% better than the competition. It has an adjustable drop-leg system that can be adjusted from eight inches down to five inches. At the bottom of the power jack is a drain hole.
Oh, and we’d be remiss not to mention that this car has a maximum payload capacity of 3,500 lb. A 14-inch stroke combined with an 8-inch drop leg makes a jack that can be raised up to 22 inches high. It needs a 12-volt power supply and has a cord that’s 55 inches long. At the top of the stroke, all the electrical components are encased in a motor cover.
This cover also has a bright LED light for nighttime operation. It also has a powder-coated outer tube and a zinc-plated inner tube. Check the current price on Amazon.
What I like:
- Simply attach the handle if you want to operate it by hand
- Helps to save space at the front of your trailer’s tongue
- It has five different locking positions
- One-piece motor cover that protects electrical components from dirt and water
What I don’t like
- Power jacks should only be used on trailers that are A-frame
The top 5 will apply to 95% of the market. These guys are the best of the best and they meet the needs of almost everyone.
If you are not sure what you need to know or how to make a confident buying decision continue reading to figure that out. I hate making a buying decision blind and I always go a little overboard with the research and comparisons especially when an electric trailer tongue jack average cost is about $150 and up.
So read on to get the basic information to make an educated decision so you won’t have to take advantage of Amazon’s 30-day return policy.
How Do I Pick An Electric Tongue Jack?
Whether you choose to use a manual or an electric jack, it’s important that you use the right one for the job. If you’re using a manual jack, make sure that you know how to use it; if you’re using an electric trailer tongue jack, make sure that you know how to operate it. It’s important to remember that a manual jack will probably be easier to use than an electric one.
Make sure that the jack is strong enough to support the weight of your tongue, and that it also has the ability to lift a portion of the tow vehicle’s back end. You can’t overdo it, but you certainly can underdo it.
Not all jack stands are equal in terms of their capacity to support loads. You need to choose a jack that can handle the weight of your vehicle’s trailer.
This is going to be one of the most challenging parts of the whole process, as you will need to find out the correct tongue weight for your vehicle. If you don’t know this, you won’t be in a position to make an educated decision on what tongue weight to buy. It’s suggested that you measure the tongue weight of your vehicle and compare it with the weight of the trailer.
What Is The Right Weight Capacity For My Trailer Tongue Jack?
The tongue weight of a trailer should not exceed 15% of the total weight of the trailer.
It is easy to overestimate the weight of a trailer when you do not take into account the weight of all the heavy items that are placed in the back of the trailer. You can estimate the weight of a trailer by taking the weight of the trailer and subtracting the weight of all of its contents. The tongue weight of a trailer is the total weight of the trailer and all of its contents.
If you do not know how much tongue weight you will need, do not worry about it. The weight of the trailer and the weight of the load on the hitch should be equal. This means that you should also know the weight of the back of your truck. You will not be lifting the truck off the ground.
Check with your vehicle’s manufacturer to find out how much weight your vehicle can carry. Once you have an idea of what your tongue weight is plus a portion of what your truck end weighs, you can decide on how heavy-duty of a hitch you need. It’s always better to have too much of a good thing than not enough of a good thing.
Do you need to do Jack Leg Extensions? Some jacks have a drop leg which brings the bottom of the jack closer to the ground before you even begin lowering it. The reason for this is to save power. Some people stack boards or levelers underneath the jack.
This seems like a good idea, but you should think twice before you do it. The trailer will be unstable if you put it on the ground, so be sure to put it on a level surface when you are ready to move it. The trailer will tip over if it is not on a level surface. Just ask Marshall, hahaha)
Therefore, a leg curl is a good general rule. Some jackshafts come with extensions, such as the Kelly’s Husky Super Brute. Other jackshafts do not. If you like to stay in one spot, you could get an after-market drop leg, such as the Fastway Flip.
Jack feet are an important part that is often overlooked. Some manufacturers try to cut costs by not including a foot in the jack. The jack is simply a hollow tube with a hole in it.
Exactly, it is going to sink again. There are after-market feet that you can buy and put on your own jack. If you do a lot of off-pavement camping, you could also use these feet.
What Are Some Of The Advantages Of An Electric Jack?
When you have a vehicle that needs to be moved around a lot, an electric vehicle jack is a great tool to have in your toolbox. If you have a lot of vehicles that need to be moved, an electric vehicle jack will make the job much easier. It’s also a great idea to have an electric vehicle jack if you’re moving a lot of vehicles.
Black A-Frame Jack with the powered drive is a unique trailer tongue jack. You can raise and lower the trailer using the push of a button. Also, the jack has an easy-to-use push-to-start switch. This jack comes with a 1/2-inch roller bearing for increased durability.
What are some of the common mistakes that people make when they buy a jack?
Do not make the mistake of using the wrong sized electric jack when you are working on your RV. It is important to use a jack that is large enough to support the weight of the trailer. The tongue weight of your trailer should always be taken into account.
Thanks for reading and stay dirty